01-05-2017
4
Get cartridge IDs
Confirm that the tool memory corresponds with the serial numbers of the
cartridges fitted to the tool.
Enter the tool ID and press SEL twice. When a wireless connection with the tool has
been established, the handset will display the serial numbers of the cartridge calibration
parameters currently held in its memory.
Remote Control settings
Enable or disable the sound, vibration feedback, data logging and reset the
Remote Control tool identification data.
Navigate to any setting icon and press SEL to enable or disable the feature.
The data logging option is enabled by default. This records an activity log of all
commands and tool responses into the HANDYLOG.CSV file, which is located on the SD
card. The csv file format allows the file to be opened by any spreadsheet editing
program for review and analysis.
Remote Control shutdown
Force the Remote Control to switch off.
Note that if no buttons are pressed for 10 seconds, the unit will switch off automatically
anyway.
Remote Control lifetime usage
Displays time spent adjusting tools, total RC ‘on’ time and the number of
times it has connected to a tool.
Also displayed is the handset’s part number and serial number.
General information: Recharging
The handset contains a high capacity rechargeable Nickel-metal hydride (NiMH) battery.
It must always be recharged with the supplied fast charger AE-CHR08. Please follow the
detailed charging instructions supplied with the recharger.
The fast recharge cycle takes about 30 minutes. A full charge should provide several
weeks of ordinary use.
