background image

20

21

Set Up Your Meter - Set Up the Date, Time and Volume

Set Up Your Meter - Set Up the Date, Time and Volume

4. Time format 12/24H selection

With the time format blinking, press the Left or Right 
button to switch between 12H and 24H. Press the Main 
button to confirm. Once confirmed, the Hour Setting will 
appear. 

5. Hour setting

With the hour blinking, press the Left or Right button until 
you see the current hour. Press the Main button to 
confirm. Once the hour is confirmed, the Minute Setting 
will appear.

6. Minute setting

With the minutes blinking, press the Left or Right button 
until you see the current minute. Press the Main button to 
confirm. Once the minute is confirmed, the Volume 
Setting will appear.

5)

6)

4a)

4b)

NOTE

- If you do no change any settings during Meter Set-up for over 2 minutes, 

RIGHTEST Blood Glucose Meter will leave setting mode and power off 
automatically.

7. Volume Setting

With the volume blinking, press the Left or Right button 
to turn the volume on or off. Press the Main button to 
confirm and finish the settings.

8. Setting the Unit of Measurement

With milligrams per deciliter (mg/dL) or millimoles per 
liter (mmol/L) blinking, press the Left or Right button to 
switch. Then press the Main button to confirm it and 
finish the settings.

9. Ending setting

After measurement of unit setting, for confirmation you 
will hear a beep (if volume is turned on). All the settings 
are saved and completed and will return to time screen. 
(If Volume is turned off, the display will directly return to 
time screen without a sound of "beep".)

7a)

7b)

8a)

8b)

9)

Summary of Contents for GT200

































Reviews: