16
17
Meter Activation and Battery Change
Meter Activation and Battery Change
1. Turn the RIGHTEST Blood
Glucose Meter over. Press
and slide the battery cover
to open.
3. Put the battery cover
back until it snaps into
place.
2. Install the batteries. Be sure
to put the batteries in the
correct direction (polarity (+)
facing up).
Your RIGHTEST Blood Glucose Meter comes with 2 CR2032, 3 volt, batteries installed. New batteries
will provide power to perform approximately 1000 tests under normal use. Press the main button or
insert a strip to activate your meter.
PRECAUTION
- Please follow the local regulation to properly discard a used battery.
4. RIGHTEST Blood Glucose Meter will enter Self-Testing Mode automatically when replacing the
battery (all symbols will appear on the screen).
5. Press any button to exit the self-test and enter Setting Mode.
6. You must set the time and date when replacing the battery. See Chapter "Setting Up Your Meter -
Setting the Date, Time, and Volume" on page 18. Test results are still stored in the memory.
NOTE
For some meter please pull off the plastic tape and press the main button to activate the
meter.
Summary of Contents for GT200
Page 2: ......