If the program could not detect the analyzer, check whether Bluetooth is enabled in the analyzer (1 mode in
the Settings menu) and whether Bluetooth is enabled on your smartphone/tablet.
Charging the analyzer.
The
Stick 230 analyzer
is powered by a
18650 Li-ion
battery. The analyzer comes with a
2800 mAh
battery.
The analyzer can be charged from a PC. According to the specification, when connecting the analyzer to the
USB 2.0 connector, the maximum charge current is 0.5 A. When connecting the analyzer to the USB 3.0
standard connector, the maximum charge current is 0.9 A.
The analyzer for charging can be connected to any charger (for phones/tablets) with an output voltage of 5
volts and a current of at least 0.5 A.
The maximum charge current of the analyzer is 1 A.
The time for a full charge of a battery with a capacity of 2800 mAh (from 0 to 100%) is about
3 hours
(when
using a charger).
During charging, the bottom of the analyzer near the USB connector may become slightly warm. This is not a
malfunction.
During charging in the off state, the lightning icon is displayed on the analyzer screen.
During charging, when the analyzer is on, the
CHG
icon will be displayed at the top of the screen. If the
charge occurs with a current of 1 A, then, in this case, the
FAST
icon is additionally displayed. For example, a
screenshot of the screen of the analyzer charged from the charger:
