User’s manual
Self tests
There are several built-in self tests in the
AA-35 ZOOM analyzer, which can be run
by the user to make sure the analyzer is
working properly.
Make sure all cables or adapters
are disconnected from the antenna
connector of your analyzer, then press
(OK) to start the first test (
Detector
test
).
You should see the “
Passed
” message in
case of success.
Continue with two more tests: the second
(
Built-in filter test
) and the third (
Test
with load
). For the third test, make sure
to connect a good 50 Ohm load directly
to the analyzer’s antenna connector.
26
Summary of Contents for AA-35 ZOOM
Page 1: ...AA 35 ZOOM RigExpert User s manual Antenna and cable analyzer...
Page 2: ......
Page 23: ...RigExpert AA 35 ZOOM 23...
