BMD-200 Evaluation Kit User Guide
August 10, 2016
BMD-200-EVAL-UG-V1.4
Page 9 of 20
Figure 7 – Keil Flash Tools Debug Settings Window
7.
Build (
, ‘F7’) and download the example program to the Evaluation Board (
, ‘Flash’->
‘Download’).
8.
Your BMD-200 Evaluation Board should now be running the example application.
9.
If the Heart Rate Service example was loaded in step2 and 3, its functionality may be checked
with the “nRF Toolbox” app on iOS or Android. Run the app and select the heart rate monitor
(HRM). Make the connection to the “Nordic_HRM” device.
3.2.
Evaluation Board with CMSIS-DAP (mbed)
The BMD-200-Eval-M comes with a built in CMSIS-DAP (mbed) programmer on board.
3.2.1.
Connect BMD-200 Evaluation Kit to computer
1.
Connect the BMD-200 Evaluation Board to a computer using the USB cable provided
2.
The status LED, D6, will turn on indicating the board has power
3.
After a few seconds the computer will recognize the board as a standard USB drive named
‘MBED’
3.2.2.
Program BMD-200 Evaluation Kit (Drag and Drop)
1.
Register for an mbed account at
developer.mbed.org.
2.
Go to
http://developer.mbed.org/platforms/Nordic-nRF51822/
and add the Nordic nRF51822
platform to your compiler.
3.
Import either the
blinky app for the BMD-200
or the
mbed library modified for the BMD-200
(replaces the “mbed” library).
4.
Click ‘Compile’ along the top toolbar in the mbed compiler page. When complete it will
automatically download hex file.
5.
Drag and drop the downloaded hex file into the ‘MBED’ drive. This will automatically program
the Evaluation Board. The status LED, D6, will flash while programming.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
