BMD-200 Evaluation Kit User Guide
August 10, 2016
BMD-200-EVAL-UG-V1.4
Page 6 of 20
3.1.3.
Program BMD-200 Evaluation Kit with the S130 Soft Device
1.
Open the Nordic nRFgo Studio application. In the ’Device Manager’ window, there will be a
device named Segger followed by serial number under ‘nRF51 development boards.’ Select
Segger and the device programming interface will appear in the main window
2.
Click ‘Erase all’ to clear the device of all current programmed software
3.
Select the 'Program SoftDevice' tab in the pane on the right
4.
Click ‘Browse…’ and navigate to the location of the extracted SoftDevice (<unzipped SDK
location>\components\softdevice\s130\hex. Select the SoftDevice hex file
5.
Click program
6.
After programming, nRFgo Studio should look similar to Figure 4.
Figure 3 – nRFgo Studio SoftDevice Window
7.
Note the starting address of Region 1 for the application firmware (0x1B000 in this example)
8.
Close nRFgo Studio.
Note: The S110 SoftDevice may be more suitable for the BMD-200-A with 16KB RAM
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
