6
Check your order
This product comes in a single carton, containing:
1. Supine Stander (includes padding, footboard, adjustable armrests, hip strap, chest strap,
leg straps, one pair of laterals, one pair of head blocks and double-locking casters).
2. Accessories for the Supine Stander.
You may not have ordered all of the available accessories, but use the diagrams that follow
to confi rm that your order is complete.
Headboard
(see Figures 6a and 6b)
To prevent spinal
injury, ensure the
headboard is in place before tilting the
client to a horizontal position.
To prevent pinching or crushing, ensure
that all body parts are clear of the joint
between headboard and mainboard
during adjustment.
Attaching headboard:
Lift the headboard, slide the cleat (A)
into frame slot, and tighten the
cleat knob (B) (see Figure 7a).
Attaching head blocks:
1. Loosen two knobs (C) on the head block
adjusting clamp.
2. Remove the lateral with curved bracket
(D), turn upright, and insert bracket into
clamp.
3. Slide curved bracket into clamp past
the safety dimples to desired spacing.
Brackets must overlap if spacing of less
than 8” is required.
4. Tighten both knobs (C) to secure the
head block.
5. Repeat this procedure on the second
head block.
WARNING
Basic components
Figure 6a
Figure 6b. Headboard with headblocks attached.
C
C
D
D
A
A
B
B
