16
(see Figure 16a)
Attaching
Remove the knobs (A) and one washer off
each threaded stud.
1. Place abduction wedge in appropriate
slot with one plastic washer on each
threaded stud between wedge and
stander.
2. Put the second washer on each of the
threaded studs between knobs and
stander.
3. Thread and tighten knobs securely.
Adjusting
To adjust the amount of abduction, raise
one wing of the wedge to expose the
adjustment screw (B). Turn screw out to
increase abduction. Raise the second wing,
and adjust it in the same way.
Round abductor
(see Figure 16b)
Attaching
To attach the round abductor, remove
the knob and place where appropriate.
Re-tighten knobs securely.
Collar
(see Figure 16c)
Attaching
To attach the collar, wrap it around the
round abductor, and fasten snaps.
B
B
Figure 16a
Figure 16b
Figure 16c
Adjustable abduction wedge
A
A
