12
Accessories
Front handle
To prevent pinching or
crushing, ensure that
all hands and feet are clear of the vertical
lifting column before activating the up/
down switch.
The front handle enables a caregiver
to maneuver the E-Pacer. It includes the
up/down switch (A), located on top of the
right hand-grip, which adjusts the height of
the body support. Push the rocker switch
up to raise the body support and down to
lower it (see Figure 12a).
Attaching
The front handle is removed for shipping
and must be attached to the E-Pacer frame
with four bolts:
1. With the Allen wrench found in the
accessory carton, remove the four bolts
from the cover plate and take it off (see
Figure 12b).
2. Hold the front handle against the
attachment point as shown (see Figure
12c), insert the bolts in the holes, and
tighten them snugly with the Allen
wrench, starting with the top bolts.
3. Insert the electrical jack plug into its
receptacle on the actuator control box
(see Figure 12d). The release tab on the
plug must be facing towards you.
WARNING
Figure 12a
Figure 12b
Figure 12c
Figure 12d
A
A