9
Figure 9b
Figure 9c
Figure 9a
Components
Tub stand
To prevent falls,
make sure all four
chair legs are firmly latched in the
sockets on the stand before using the
tub stand.
Figure 9a:
The tub stand raises the bath
chair to a seat height of either 12½"
(32 cm) or 18½" (47 cm), depending on
whether the tub stand legs are raised or
lowered (see page 6).
Figure 9b:
To attach the chair onto the tub
stand:
1. Rotate front and back bath chair legs
down into the vertical position (see
page 6).
2. Insert the legs into the four sockets.
3. Press down firmly until the latches click
into place.
To release
:
Figure 9c:
1. Press down on both gray latches at one
end of the tub stand.
2. Firmly lift up the bath chair, so that the
two latches on the other end disengage.
The tub stand is not sized
to fit onto the shower
stand or another tub stand.
WARNING
NOTICE
