Wheel diameter measuring gauge, IDK-BT
IDK-BT [Revision 2.2] 4
th
September 2017
16
Designations
:
-
order number of the car to be measured (number of cars in the
train);
-
number of the car to be measured;
-
editing of the input wheel parameters;
-
a previous/subsequent wheel;
-
a measured wheel;
-
a wheel to be measured next time;
-
a non-measured wheel;
-
a measured wheel to be measured again
-
measurement.
Measure the wheel offered by the program (highlighted in green color), as it is
shown in par.
after the measurement, the PDA will show the value of diameter. When a diameter falls
out of the specific tolerance, its value is indicated with red color
when a satisfactory result is obtained, press
Save
on the display to save it
the program will offer to pass to measurement of the next wheel in accordance
with selected scheme of measurement
12.5. Browsing the database
To browse the database:
select
Service > Profiles
in the main window. View on the screen
