19
3
WAY BALL VALVES
-
DEFAULT FLOW PATTERNS (CONTINUED)
Side entry, 90° operation
-
Default flow pattern
T Port 3 way valves
-
Diverting
LED Indication
Side entry, 90° operation
-
Default flow pattern
T Port 3 way valves
-
Mixing
LED Indication
BLUETOOTH
Settings can only be accessed by via the Bluetooth User Interface on a Android based device;
•
Install RIFT® 200 Android Application from the Googly Play Store.
•
On the Android device, pair with the RIFT® 200 , ensure that Bluetooth is on. Add device Identified
by the unique model number on the front label; enter pairing code
“1234”
when prompted.
•
Connect through the app or with device settings
•
Run the program from the RIFT Actuator icon.
•
Log on. Only authorised registered users will be able to access and control their purchased actuators
•
Select
‘
Connect to Actuator
’
pair with it if not paired already, this will move the paired Actuator
over to the
“
Connected List
”
•
To amend parameters, click either Basic or desired feature as appropriate.
•
Click into the parameter box of a setting you wish to amend, type a value or select from a
dropdown, and click
‘
Write To Flash
’.
The new setting is written to the RIFT® 200 flash memory and
is available for use immediately. You can test the changes where applicable by selecting using the
relevant buttons on the screen of your Bluetooth device (e.g. OPEN) and clicking, or physically
touching the Pad on the RIFT® 200. Please note that some parameter changes are chargeable and
you must purchase features from the Portal to amend such parameters.
•
Basic data is available on the Settings screen of the User Interface, including the number of full
cycles the RIFT® 200 has achieved (open, reach desired working angle, close), and the number of
times the motor has started for modulating applications where the end of travel is rarely reached).
When updating flash memory following a parameter change, take care to only click
‘
Write to Flash
’,
the
new settings are written to flash and a rotating.
BATTERY FAILSAFE FUNCTION (BFS)
This Bluetooth configured option uses an internal trickle charged industrial Li
-
Ion battery as an
alternate power source and independent to any external power supply, to set the actuator to a
pre
-
determined position should the external power fail the FAILSAFE Feature must be activated.
These pre
-
determined positions are:
1)
Close on external power failure (Normally Closed or NC)
2)
Open on external power failure (Normally Open or NO)
3)
Set fail to specific angle on external power failure (option to enter specific angle is only made
available when this option is selected)
