29
A.
Sensor connection
I.
Sensors can be input to the Terminal Block S1 ~S6.
II.
It can be connected regardless of channel numbers.
B.
Relay connection
I.
Relay can be input to the Terminal Block R1~R4.
II.
Relay can be connected to the Alarm action devices like Siren or Light bar.
C.
POS connection
I.
POS (RS-232c) can be input the Terminal Block No. 1
Please note that relay might be not working depending on the types. In this
case, power supply has to be connected to the relay.
NTSC/PAL Setting
Open the top case of DVR then change the setting with “2pin Jumper” on the board.
NTSC / PAL SELECT Direction :
JP2
The way of setting
JUMPER OPEN : NTSC
JUMPER SHORT : PAL
Please don’t change this setting without any reason as we provide the products
with correct setting normally.
