22
A.
Sensor connection
I.
Sensors can be input to the Terminal Block S1 ~S4.
II.
It can be connected regardless of channel numbers.
B.
Relay connection
I.
Relay can be input to the Terminal Block R1.
II.
Relay can be connected to the Alarm action devices like Siren or Light bar.
C.
POS connection
I.
POS (RS-232c) can be input the Terminal Block No. 1
Please note that relay might be not working depending on the types. In this
case, power supply has to be connected to the relay.
NTSC/PAL Setting
Open the top case of D
VR then change the setting with “2pin Jumper” on the board.
NTSC / PAL SELECT Direction :
JP2
The way of setting
JUMPER OPEN : NTSC
JUMPER SHORT : PAL
Please don’t change this setting without any reason as we provide the products
with correct setting normally.
