19
Config Switch Setting
Switch 1
Switch 2
Terminal Block
[Figure 5 Kute Series TB1 Description]
[Figure 6 Kute Series TB2 Description]
This is Terminal Block loatced at the rear to control PTZ, Sensor and Relay features.
①
PTZ Camera connection
TRX+/TRX- calbes from PTZ cameras can be input to the TRX+ and TRX-. You can see the compatibility list of
PTZ camera from APPENDIX of this manual.
②
Sensor / Relay / POS
A.
Sensor connection
I.
Sensors can be input to the Terminal Block S1 ~S16.
II.
It can be connected regardless of channel numbers.
B.
Relay connection
I.
Relay can be input to the Terminal Block R1~R4.
II.
Relay can be connected to the Alarm action devices like Siren or Light bar.
Please note that relay might be not working depending on the types. In this
case, power supply has to be connected to the relay.
Sensor and Relay type
NC(Normal Close)
: Normal close and Event open
NO(Normal Open)
: Normal open and Event close
