background image

20027770

GB

Information and general instructions

2.2

Guarantee and responsibility

The manufacturer guarantees its new products from the installa-
tion date, in accordance with the regulations in force and/or the
sales contract. At the moment of the first start-up, check that the
burner is integral and complete.

In particular, the rights to the guarantee and the responsibility will
no longer be valid, in the event of damage to things or injury to
people, if such damage/injury was due to any of the following
causes:

incorrect installation, start-up, use and maintenance of the
burner;

improper, incorrect or unreasonable use of the burner;

intervention of unqualified personnel;

carrying out of non authorised modifications on the equip-
ment;

use of the burner with safety devices that are faulty, incor-
rectly applied and/or not working;

installation of untested supplementary components on the
burner;

powering of the burner with unsuitable fuels;

faults in the fuel power supply system;

use of the burner even following an error and/or an irregular-
ity;

repairs and/or overhauls incorrectly carried out;

modification of the combustion chamber with inserts that
prevent the regular development of the flame, as structurally
established;

insufficient and inappropriate surveillance and care of those
burner components most subject to wear and tear;

use of non-original components, including spare parts, kits,
accessories and optionals;

force majeure.

The manufacturer furthermore declines any and every re-
sponsibility for the failure to observe the contents of this
manual.

WARNING

Failure to observe the information given in this
manual, operating negligence, incorrect installa-
tion and the carrying out of non authorised modifi-
cations will result in the annulment by the
manufacturer of the guarantee that it supplies with
the burner. 

Summary of Contents for RS 650/E BLU





















Reviews: