20008113
18
GB
Installation
Once the combustion head adjustment is completed:
³
reassemble the burner on the guides 3) at about 4” from the
pipe coupling 4) - burner in the position shown in Fig. 12;
³
insert the electrode cable, then slide the burner as far as the
pipe coupling - burner in the position shown in Fig. 17;
³
unscrew the 2 screws 2) from the extension 6) and reposition
them as previously.
³
refit the screws 2) on the guides 3);
³
fix the burner to the pipe coupling with the screws 1).
When fitting the burner on the two guides, it is
advisable to gently draw out the high voltage
cable until it is slightly taut.
CAUTION
Fig. 17
D9276
Summary of Contents for RS 200/E LN
Page 2: ......
