Riello RS 1300/EV C01, Modulating Operation

Page: 36 / 56

20089633 34 GB
Faults - Possible causes - Solutions
If faults arise in ignition or operations, the burner performs a
“safety stop”, which is signalled by the red burner lockout LED.
The display visualises alternately the lockout code and the rela-
tive diagnostic. To reset the start-up conditions, refer to the “Re-
set procedure” indicated in the control box manual supplied.
When the burner starts again, the red LED goes out and the con-
trol box is reset.
8 Faults - Possible causes - Solutions
WARNING
In the event the burner stops, in order to prevent
any damage to the installation, do not unblock the
burner more than twice in a row. If the burner
locks out for a third time, contact the customer
service.
DANGER
In the event there are further lockouts or faults
with the burner, the maintenance interventions
must only be carried out by qualified, authorised
personnel, in accordance with the contents of this
manual and in compliance with the standards and
regulations of current laws.