ENGLISH
6
C
ABLE
S
PECIFICATIONS
In case it is necessary a cable longer than 5 meters, it is possible to build one following the
schematic in Picture 6 and Picture 7.
Please note that the total cable length must be less or equal than 30 meters and the
Number of devices must be less or equal than 6 (where this device counts 2).
The cable used must be shielded and
only one end of the shield
should be tied to
protection earth (PE).
Picture 6 netman to sensor interface
Picture 7 sensor to sensor cable
INSTALLATION
N
ET
M
AN PLUS JUMPER SETTINGS
In order to use the environmental sensors, please configure the JP6 and JP10 jumpers as
shown below. See also the
NetMan plus
manual for configuring the other jumpers.