ENGLISH
10
IRRADIANCE SENSOR APPLICATION
With reference to Picture 4, in order to use an irradiance and temperature sensor, please
connect the irradiance output to the “Analog Input 1” terminal; temperature to the “Analog
Input 2” terminal; GND on any of the available GND connections.
The supported input ranges for the sensor are (0 ~ 1200) W/m
2
and (-20 ~ +80)°C
Please tie to PE the
shield
of the sensor’s cable either on this device side, or on
transducer side
not on both sides
.
Once the setup described in the previous chapters is accomplished, the Irradiance sensor
values are available through the software SunVision (please refer to its user’s manual).