20138365
14
D
Elektrische Daten und Betriebszeiten
3.7.27 Zulässige Längen der externen Anschlüsse
an den Brenner
Tab. F
3.8
Automatische Deaktivierung der Vorwärmung (nur bei vorgerüsteten Anwendungen)
Es besteht die Möglichkeit, die Funktion zum Vorwärmen im Au-
tomatikmodus durch Drücken der Fernentstörtaste zu deaktivie-
ren.
Tab. G
Wenn die Vorwärmung deaktiviert ist, bleibt die Vorwärmung
aus bis:
- eine Abschaltung erfolgt
- eine Unterbrechung der Hauptspannungsversorgung erfolgt
- Es kommt zu einem Stillstand wegen aussetzendem Betrieb.
Die Abschaltfunktion der automatischen Vorwärmung geht nicht
verloren, wenn der Abschalttest aktiviert oder der Wärmeanfor-
derungsthermostat geöffnet wird.
Ausgangskabel des Brenners Kennnummer
Maximal
zulässige
Länge
(Meter)
Stromversorgung
L1 (L), N
20
Wärmeanforderungsthermost
at
TL (T1,T2)
20
Einstellthermostat 1. - 2. Stufe
TR
1
Stundenzähler
B4
3
Externe
Störabschaltungsanzeige
S3
20
Fernentstörung
R (RS)
20
ACHTUNG
Bei Brenneranwendungen mit ferngesteuerten
Befehlen, die entfernungsmäßig jene überschrei-
ten, die in Tab. F angegeben sind, müssen Steu-
ervorrichtungen mit Relais (230Vac) eingesetzt
werden, deren Kontakte in der Nähe angeordnet
sind oder die angegebenen zulässigen Längen
nicht überschreiten.
Deaktivierungssequenz der
Vorwärmung
Drucktaste LED
Farbe wird
Abschaltung der Vorwärmung nur er-
möglichen, wenn keine Störabschaltung
oder Störungen vorliegen
-
Deaktivierung der Vorwärmung mit Hilfe
der Fernentstörtaste erlauben.
-
Brenner versorgen und gleichzeitig die
Fernentstörtaste für 3 Sekunden gedrüc-
kt halten.
ROT
Loslassen der Fernentstörtaste inner-
halb von 3 Sekunden.
OFF
Der Brenner wird die Deaktivierung der
Vorwärmung nur dann zulassen, wenn
die Fernentstörtaste innerhalb von 3 Se-
kunden losgelassen wird.
-