C
ONNECTIONS FOR THE MODEL WITH STANDARD BYPASS
Proceed as follows in order to open the UPS:
open the door
remove the switch cover panel (see "UPS front views" point 6)
Connect the input and output cables to the terminals as shown in the figure below:
N.B.
For the input and output connections, respect the order from top to bottom as described in the boxes. The label
marked “N” present on the terminals identifies the neutral terminal.
Once installation has been completed inside the equipment, replace the switch cover panel and close the door.
JUMPERS
OUTPUT:
L3
L2
L1
N
INPUT:
L3
L2
L1
N
BATTERIES:
Order of connection from
left to right:
+
N
−
P.E.
