A
Fig. 4
B
Fig. 5
Fig. 6
2 mm
X
Y
120/70-14” 55P
140/60-14” 64P
3.2 IDENTIFICATION DATA:
CHASSIS N° / ENGINE N°
•
To see the vehicle identification number (VIN) (A - Fig. 4), raise
the seat and remove the cover in front of the helmet compart-
ment.
•
Engine identification data are visible on the left engine crank-
case (B - Fig. 5).
Altering identification data will be punished according to
the law.
•
When ordering spare parts, also quote the vehicle identifica-
tion data.
3.3 TIRES
Type: Tubeless (without inner tube)
It is possible to use tires with load and speed indexes
that are higher than or identical to those indicated. It is
however necessary for the speed indexes to be identi-
cal for both tires.
USE ONLY HOMOLOGATED TIRES
Check the tire conditions (before every journey): if they are broken
(cracked) or cut, have them replaced as soon as possible.
“T.W.I.” marks are provided all around the tire side walls. These
correspond to tire wear indicators, which are situated in the tire’s
tread; if there is no difference between the thickness of these
indicators and the tread depth itself, the tire must be replaced.
Minimum tread depth (front and rear) is 2 mm (Fig. 6).
4
5
6
english
8
1
3
2
