manualshive.com logo in svg

Riedex DM-200, User Manual

Share
Download
Riedex DM-200 User Manual Download Page 26

26

D U S T   E X T R A C T I O N   S Y S T E M S

EG-DECLARATION OF CONFORMITY

According to the Machinery Directive 2006/42 / EC Annex II A                                                                

Manufacturer:

Riedex BV

Hoofdstraat 17

8811 HD RIED

NEDERLAND

Tel. +31 (0) 517 26 92 41

Declares that the machines below meet the safety and health requirements of the CE Machine Directive on 
the basis of their design, construction and design.

Product name:   

 

Extraction unit

Brand: 

 

   Riedex

Type designation:  

 

DM-250, DM-300, DM-350

The following European standards have been applied:

2006/42/EG

Machinery Directive

2006/95/EG

Low Voltage Directive

1997/23/EG

PED Directive

                                                 

This CE declaration of conformity is only valid if the machine has received the CE marking. Any change to 
the machine that has not been agreed with us means the immediate loss of the declaration of validity.

The undersigned of this declaration is the authorized representative for compiling the technical documenta-
tion.

Ried, the Netherlands, 10.11.2018 

Ing. R. Faber, director of Riedex BV

b

IjlagE

 4: Eg-

vErklarIng

 

van

 

ovErEEnstEmmIng

Summary of Contents for DM-200




























Reviews:

No comments

Brands by name

Popular brands

Load more brands