PERFORMER Digital Partyline, User Manual, Version 2.30
1
SAFETY INSTRUCTIONS
Please carefully read the following information before using or installing any digital partyline
device.
All external powered devices, such as Master Stations, System Interface / Splitter should only
be used with the three pole power cable provided and when connected to a grounded power
source. Do not place any heavy or sharp-edged objects on either the power or data cables.
No device has any controls or user serviceable parts inside. The housing should only be
opened by trained service personnel.
Place no containers with liquid on the equipment. Should liquid penetrate the housing,
immediately unplug the unit and have it inspected by an authorized service technician.
Do not expose the devices to extreme humidity or dust.
If the equipment is brought from a cold to a warm environment, condensation may form
inside the unit. In this case, wait at least 6 hours before connecting the power cable to an
electrical outlet.
In order to prevent interruptions of the digital audio signal, keep the cable length as short as
possible. Make sure that all connectors are securely attached. Poorly secured connectors
lead to static in the digital audio system and can also cause a reset of the entire partyline.
If a large number of devices are operated on a single partyline, a large drop in voltage may
occur, depending on the ohm resistance of the cable used. In this case, the voltage can be
boosted with the addition of other powering devices, such as C31+PSU / CR-4 / CR-2.
Information contained in this manual is subject to change without notice.
Page
6
USO
RESTRITO
