PERFORMER Digital Partyline, User Manual, Version 2.30
4.2.11
SA Stage Announcement (Momentary)
With an active SA (function key block) the microphone signal is routed to the SA output (local
4W) and the related GPI Out relay contact closes (
Æ
Pin Out D-Sub).
Selection
SA Key
SA active
Yellow 100%
SA inactive
Yellow 10%
4.2.12
M/MUTE (Latching)
Activating M/MUTE (function key block) mutes all active TALKS of the unit.
While M/MUTE is active, TALKS can be pre-selected / deselected by pressing the related
TALK key. A pre-selcted but muted TALK key flashes slowly.
Note: The microphone of the CD-2 stays active for the stage announcement SA (local 4W).
Selection
M/MUTE Key
M/MUTE active
Red 100%
M/MUTE inactive
Red 10%
TALK Key
“Active” TALK key - muted
Red 100% slow flashing
“Inactive” TALK key - muted
Red 10%
4.2.13
PGM Level Control
The PGM (program) rotary encoder adjusts the listen volume (0-100%) of the PGM input
(local 4W) of the unit. Turn the encoder clockwise to increase and counterclockwise to
decrease the volume of the program input. The PGM volume is MUTED when the encoder is
turned counterclockwise as far as it will go.
Adjust the PGM level input with the screw-adjustment of the back of the unit.
This PGM input is not routed to the partylines!
Note: Pushing the rotary encoder currently has no function (for future optional use).
Page
25
USO
RESTRITO
