PERFORMER Digital Partyline, User Manual, Version 2.30
Page
20
4
PERFORMER CD-2 DESKTOP SPK/HS STATION
The Performer CD-2 desktop / speaker station can be easily integrated in an existing digital
partyline setup with its loop trough connectors. It does not require additional power as it is
powered over the line.
The Performer CD-2 desktop / speaker station (optional power supply required) can also be
used as an master station to set up a stand-alone digital partyline system. Depending on the
set-up the optional external power supply can power up to 32 beltpacks.
4.1
Getting Started
Mount the MIC 30 microphone (optional) to the microphone connector at the front of the unit.
For headset mode, connect an appropriate headset to one of the headset connectors.
Choose the headset microphone type with the DIP switch 5 on the back of the unit.
Now start to integrate the CD-2 in your partyline system by connecting the 3-pole XLR cable to
the up-stream port. To loop through the signal, connect the next partyline device to the
downstream port with another 3-pole XLR cable.
When the up-stream port is connected to a powered line, the system will switch on
immediately and is ready to use once the blue TALK key (channel A) goes out.
Note: To use the CD-2 as a master station or in a complex system use the optional power
supply (C31 + PSU) to power the unit or to refresh the power.
4.2
User Elements Front
Microphone Connector
Channel Key
Block
Side Tone Adjustment
Function Key
Block
PGM Encoder
Headset Connector
Headset Encoder
Speaker Volume
Encoder
Loudspeaker
USO
RESTRITO
