Riedel Bolero 2.0, User Manual

Page: 70 / 130

70
Bolero 2.0 User Manual
3.6 Technical Specifications
Beltpack Product Code BL-BPK-1006-19
Multi-path delay spread
protection Yes, ADR (Advanced DECT Receiver)
Audio Bandwidth 200 Hz ... 7 KHz (-3dB)
Mode of Operation Full-duplex on all routes
Encryption AES256 Bit encryption
Line in 3.5 mm jack, 40 Hz ... 20 kHz, max. +12 dBu input level
(local audio mix only)
Talk Controls 4x push b 1x reply key + 2x walkie-talkie keys
(PTT, Latching & Auto mode)
Volume / Level Controls 2x Master or slave + menu navigation
Display High contrast sunlight readable full color LCD
Audio prompts Out of range, Bluetooth connected / disconnected, battery low, volume change,
Beltpack registered / deregistered / not connected
No. of Full-Duplex
Audio Paths 6 with individual level control
Handheld Operation Walkie-talkie mode
Vibrate Module Vibrate indicates incoming call or silent call is active,
low battery, out of range, Beltpack registration, power on/off
Internal Loudspeaker Freq. <500Hz ... >7kHz 80dB/SPL/0.5W/1m, @ <5% THD
Remote Health Monitoring Battery charge status, via web browser
Battery Lithium Ion external removable battery pack with user removable clip
USB Type-C Connection USB 2.0 for Beltpack charging and firmware update
Operation Time ~17 hours typical
Headset Connector 4-pin male XLR, user replaceable
Microphone Type Electret (~5V bias voltage) or dynamic, user selectable or automatic
Side-tone and microphone
gain Individually adjustable for each Beltpack & via remote control
Bluetooth V4.1 (HSF – hands free profile, A2DP – streaming profile)
Bluetooth phone call mix
into intercom Yes
Lanyard anchor points Yes
Dimensions Width 86 mm / 3.4"
Height 130 mm / 5.1"
Depth 48 mm / 1.9"
Weight 420 g (incl. battery and clip)
Environmental IP65 sealing: dust tight + water jet from all angles
Operating Environment Temperature -10° … +55°C
Humidity 0 % ... 90 % rel. (non-condensing), Ta=40°C
Storage Temperature -20° ... +50°C (long term) / -20° ... +60°C (short term)