Use
22
Rieber GmbH & Co. KG
6.3.6
Messages due to exceeded usage times
If the usage time is exceeded:
•
The red usage time LED lights up.
•
A continuous acoustic tone is emitted.
•
The text shown on the display indicates the necessary measure.
The time intervals for cleaning the high-performance grease separators are no
more than 12 operating hours.
Clean grease filters
➢
Risk of fire
Clean the high-performance grease separators and reinsert them correctly
with the other filter components.
➢
Replace filter mat if necessary.
The time intervals for replacing the Rieber active carbon filters are maximum
500 operating hours. Only use the filter type specified in the display.
Replace Rieber active carbon filters
➢
Replace the Rieber active carbon filters in the technical compartment.
6.3.7
Reset usage times, display operating hours
Reset the usage time counters to
‘
0
’
➢
Carry out the maintenance work correctly as indicated in the display. Only
then should you reset the message. To do this:
➢
Still in off mode, press the TURBO and RESET buttons simultaneously for at
least 10 seconds.
▌
The counters are set to
‘
0
’
counter status.
Display operating hours
➢
Press the TURBO button and hold it pressed for at least 10 seconds.
▌
The total number of operating hours is shown in the display. This
is the time during which the fan control is switched on. The display
cannot be reset.
