Before first use
18
Rieber GmbH & Co. KG
6.1.4
Clean the appliance
Clean the appliance thoroughly before using for the first time.
Clean with a damp cloth and rub dry with a clean cloth. Rinse the accessories.
See ‘Cleaning, maintenance and care’, page 24 ff.
6.2
Commissioning / recommissioning
Preconditions
Appliance has no defects or visible damage.
Appliance has room temperature and is dry.
NOTE
Protective foils or heat-sensitive objects at/in the appliance might damage the appliance
during heating.
Ensure that there are no protective foils in the inside and on the outside of the
appliance.
# Applies to banquet trolley for refrigerated meals
NOTE
If transported improperly, e.g. “headlong”, the banquet trolley for refrigerated meals might
be damaged. There must be sufficient coolant in the coolant tank.
After improper transport, e.g. "headlong", allow the appliance to rest in its correct
position for at least one hour before turning it on.
Appliances with refrigeration must not be installed near heat sources.
The ventilation grilles must be accessible.
Comply with applicable electrical regulations
Before commissioning, check the mains voltage and type of current.
Check that these match the specifications on the type plate.
The socket outlet must be easily accessible so that the unit can be disconnected
from power supply at any time.
