Rieber ACS 1600 O3 Digital Operating Instructions Manual Download Page 33

Page: 33 / 64

Use

Rieber GmbH & Co. KG

7.2.2

Switching on / Switching off

➢

Switch the ON/OFF pushbutton to ON.

▌

Control is in STANDBY.

▌

When the control (1) is switched on, the OK LED shows a green
light.

▌

During normal operation the OK LED shows a green light (10). The
extraction system starts at the lowest fan speed, level

This must be additionally switched on when the electronic fan control is switched
off.

➢

Switch the

ON/OFF

button (1) to ON if necessary.

Allow the ventilation to run on briefly if necessary, so that the vapours rising due to
residual heat cannot spread to the surrounding environment.

➢

Switch the ON/OFF pushbutton to OFF.

▌

The display goes out. The display is black.

7.2.3

Adjust ventilation intensity

Adjust intensity, levels 1 to 4

➢

Press the PLUS button (5), to increase the level.
Press the MINUS button (4), to decrease the level.

▌

The selected level and the fan icon appear in the display.

TURBO is the highest ventilation intensity level.

Adjust TURBO

➢

Press the TURBO button (3).

▌

The fan icon and TURBO appear in the display.

▌

After 5 minutes the fan switches back to the last selected
ventilation intensity.

Summary of Contents for ACS 1600 O3 Digital

































































Search results

Summary of Contents for ACS 1600 O3 Digital

Reviews:

Brands by name

Popular brands

Rieber ACS 1600 O3 Digital, Operating Instructions Manual

Search results

Summary of Contents for ACS 1600 O3 Digital

Reviews:

Brands by name

Popular brands