background image

2

IMPORTANT SAFETY INSTRUCTIONS

Safety is a combination of using common sense, 

staying alert, and knowing how your Wet/Dry Vacuum 

Cleaner (“Vac”) works.

Safety Signal Words

 

DANGER:

 

Indicates a hazardous 

situation which, if not avoided, will result in death or 

serious injury.

 

WARNING:

 

Indicates a hazardous 

situation which, if not avoided, could result in death or 

serious injury.

 CAUTION:

 

Indicates a hazardous 

situation which, if not avoided, could result in minor or 

moderate injury or property damage.

When using your Vac, always follow basic safety 

precautions including the following:

 

WARNING:

 - To reduce the risk of fire,electric shock, or injury:

•  Read and understand this manual and all labels on the 

Wet/Dry Vac before operating.

•  Use only as described in this manual.
•  Do not leave Vac running while unattended - you may fail 

to notice important signs indicating abnormal operation 

such as loss of suction, debris/liquid exiting exhaust, or 

abnormal motor noises.  Immediately stop using Vac if 

you notice these signs.

•  Do not leave Vac when plugged in.  Unplug from outlet 

when not in use and before servicing.

•  Sparks inside the motor can ignite flammable vapors 

or dust. To reduce the risk of fire or explosion, do not 

use near combustible liquids, gases, or dusts, such as 

gasoline or other fuels, lighter fluid, cleaners, oil-based 

paints, natural gas, coal dust, magnesium dust, grain 

dust, aluminum dust, or gun powder.

•  Do not vacuum anything that is burning or smoking, 

such as cigarettes, matches, or hot ashes.

•  To avoid the risk of self-ignition of drum debris, empty 

drum after each use.  Combustible materials, such as 

rags or sawdust containing stain or urethane, can be 

sources of such overheating.

•  Do not vacuum drywall dust, cold fireplace ash, or other 

fine dusts with standard filter. These may pass through 

the filter and be exhausted back into the air. Use a fine 

dust filter instead.

•  To reduce the risk of inhaling toxic vapors, do not 

vacuum or use near toxic or hazardous materials.

•  To reduce the risk of electric shock, do not expose 

to rain or allow liquid to enter motor compartment. 

Store indoors.

•  This Wet/Dry Vac is not intended for use by persons 

(including children) with reduced physical, sensory, or 

mental capabilities, or lack of experience and knowledge, 

unless they have been given supervision or instruction 

concerning use of the appliance by a person responsible 

for their safety.

•  Do not allow to be used as a toy. Close attention is 

necessary when used by or near children.

•  Do not use with a torn filter or without  filter installed except 

when vacuuming liquids as described in this manual. 

Dry debris ingested by the impeller may damage the 

motor or be exhausted into the air.

•  Turn off Vac before unplugging.
•  To reduce the risk of injury from accidental starting, 

unplug power cord before changing or cleaning filter.

•  Do not unplug by pulling on cord. To unplug, grasp the 

plug, not the cord.

•  Do not use with damaged cord, plug or other parts. 

If your Vac is not working as it should, has missing 

parts, has been dropped, damaged, left outdoors, 

or dropped into water, call customer service.

•  Do not pull or carry by cord, use cord as handle, close a 

door on cord, or pull cord around sharp edges or corners. 

Do not run Vac over cord. Keep cord away from heated 

surfaces.

•  Do not handle plug, switch, or the Vac with wet hands.
•  Use only extension cords that are rated for outdoor use. 

Extension cords in poor condition or too small in wire size 

can pose fire and shock hazards. To reduce the risk of 

these hazards, be sure the cord is in good condition and 

that liquid does not contact the connection.  Do not use 

an extension cord with conductors smaller than 1,3 mm

(16 AWG).

•  This Wet/Dry Vac is double-insulated, eliminating the 

need for a separate grounding system. Use only identical 

replacement parts. Read the instructions for Servicing 

Double-Insulated Wet/Dry Vacs before servicing.

•  Do not put any object into ventilation openings. Do not 

vacuum with any ventilation openings blocked; keep free 

of dust, lint, hair or anything that may reduce air flow.

•  Keep hair, loose clothing, fingers, and all parts of body 

away from openings and moving parts.

•  To reduce the risk of falls, use extra care when cleaning 

on stairs.

•  To reduce the risk of personal injury or damage to Vac, 

use only RIDGID recommended accessories.

•  When using as a blower:
  -  Direct air discharge only at work area.
  -  Do not direct air at bystanders.
  -  Keep children away when blowing.
  -  Do not use blower for any job except blowing dirt and 

  debris.
  -  Do not use as a sprayer.
•  To reduce the risk of eye injury, wear safety eyewear. 

The operation of any utility Vac or blower can result in 

foreign objects being blown into the eyes, which can 

result in severe eye damage. 

!

!

!

!

SP7124 WD40801 ES.indb   2

SP7124 WD40801 ES.indb   2

9/10/21   10:19 AM

9/10/21   10:19 AM

Summary of Contents for WD40801

























Reviews: