9
Accessory
Rod
Receptacles
Accessory
Storage Bag
Rods
RIDG
I
Powerhead
Accessory
Storage Rod
Pull
Straight
Up
Installing Accessory Storage Bag
1. Position rods of accessory storage bag
directly over accessory rod receptacles
in dust drum.
2. Slide rods of accessory storage bag
into accessory rod receptacles until
fully seated.
Accessory Storage Bag
Removing Accessory Storage
Bag
1. Pull straight up on rods of accessory
storage bag until bag is loose.
NOTE:
Powerhead will need to be
removed before accessory storage bag
can be removed.
Push/Pull Handle
Cord Wrap
Power
Cord
Accessory Storage
Your accessories may be stored in the
accessory storage bag, or in the two
locations on the rear caster feet.
NOTE:
Insert female end of extension
wand into the holder sleeve as shown.
Hose Storage
Areas
Accessory
Storage Bag
Female End
of Extension
Wand
RIDG
I
Cord Wrap
When vacuuming is complete, unplug the
cord and wrap it around the power
assembly as shown. The cord should wrap
under the pull handle (above the inlet) and
around and under the cord wrap of the
motor cover.
SP6735 RIDGID 5/31/11 2:13 PM Page 9
