RIDGID WD0600, Owner'S Manual

Page: 6 / 48

6
Vac Assembly
1. Line up motor cover label above vac-
uum port (located on the front of the
drum).
2. Place lid on top of drum with the han-
dles snug against the drum channel.
3. Be sure lid completely covers the top of
the drum so leakage does not occur.
4. Push down on top of the handles to
cause the flexible locking tabs to hook
onto the drum lip of the channel.
5. Make sure that the locking tabs are
snapped in place to prevent the lid from
coming off. (See inset below)
Top Assembly
Push
Down
Pull
Out
Flexible
Locking
Tab
Swivel
End
Drum
Channel
Handle
Flexible Locking
Tabs
Drum
Cord Wrap
Area
Lid
Dust
Twin Wheel
Utility
Nozzle
Hose
Caster Feet
w/Accessory
Storage
On-Off Switch
Power Cord
Drum
Handle
Casters