Figure 3 – Cutter Square to Wire
5. With hands clear of the head and other moving parts, operate the
Electrical Tool as per its instructions. Continue to press the run
switch until the tool ram automatically retracts and the wire is cut.
If the ram does not fully retract, press the electrical tool pressure
release button.
6. Inspect the cut. Be careful of any sharp edges.
SC-60C Scissor Cutter Head Instructions
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
