Specifications
Standard Equipment
Refer to the RIDGID catalog for details on equipment
supplied with specific tool catalog numbers.
Selection of appropriate materials and joining
methods is the responsibility of the system designer and/or
installer. Before any installation is attempted, careful eval-
uation of the specific service environment, including chem-
ical environment and service temperature, should be
completed. Consult Press Fitting System manufacturer
for selection information.
999-999-207.10_REV. A
6
RP 342-XL Press Tool
Icon
Solid Light
Blinking Light
Meaning
Green
Tool ON, ready to use.
Green
Low voltage. Tool will not operate. Battery - Recharge,
AC Adapter - Change power source, remove extension cords.
Red
Tool out of Specification temperature range. Bring tool
and battery to correct operating temperature range.
Yellow
Indicates service interval approaching. Light turns on after
18,000 cycles to show service interval is approaching. Tool is
usable, but tool willlock after service interval (20,000 cycles).
Tool locked. Service interval complete (20,000 cycles) and
Yellow
requires service.
Tool has malfunctioned. Remove and reinsert battery. If still
ON, have tool serviced.
Figure 5 – Tool Status Lights
Attachments ...............RIDGID Standard Series
RIDGID Extended Series/RIDGID Approved
Stroke Length.............“Standard” Configuration
“Extended” Configuration
1.57" (40 mm)
3.15" (80 mm)
Duty Cycle..................3 Press /min.
3 Press /min
Ram Force ................32 kN (7,200 lbs.)
Motor
Voltage ...................18V DC
Amperage ...............27.2 Amp
Power .....................490 Watts
Power Supply .............RIDGID RB-18XX Series18 V Li-Ion Batter y Pack
Operating Temperature
Range ...........................15° F to 122° F (-10° C to 50° C)
Weight (no battery/
attachment)...................10.8 lbs. (4.9 Kg)
Height.........................10.5" (267 mm)
Width ..........................3.35" (85 mm)
Length ........................20.9" (531 mm)
NOTICE