background image

7 − English

OPERATION

WARNING:

Do not allow familiarity with products to make you 
careless. Remember that a careless  fraction of a 
second is sufficient to inflict severe injury.

WARNING:

Always wear eye protection with side shields 

marked to comply with ANSI Z87.1. Failure to do 

so could result in objects being thrown into your 

eyes resulting in possible serious injury.

WARNING:

Do not use any attachments or accessories not 
recommended by the manufacturer of this product. 
The use of attachments or accessories not 
recommended can result in serious personal injury.

APPLICATIONS

You may use this product for the purposes listed below:

  Drilling in all types of wood products (lumber, plywood, 

paneling, composition board, and hard board)

  Drilling in ceramics, plastics, fiberglass, and laminates

  Drilling in metals

  Driving screws

For complete charging instructions, refer to the Operator’s 
Manual for the battery packs and chargers listed in the 
General Safety Rules.

BATTERY PROTECTION FEATURES

RIDGID 18 V lithium-ion batteries are designed with features 
that protect the lithium-ion cells and maximize battery life. 
Under some operating conditions, these built-in features 
may cause the battery and the tool it is powering to act  
differently from nickel-cadmium batteries.
During some applications, the battery electronics may signal 
the battery to shut down, and cause the tool to stop running. 
To reset the battery and tool, release the trigger and resume 
normal operation.
NOTE: To prevent further shut down of the battery, avoid 
forcing the tool. Switching to a lower speed will also prevent 
shut down.
If releasing the trigger does not reset the battery and tool, 
the battery pack is depleted. If depleted, the battery pack will 
begin charging when placed on the lithium-ion charger. 

WARNING:

Always remove battery pack from your tool when 
you are assembling parts, making adjustments, 
cleaning, or when not in use. Removing battery 
pack will prevent accidental starting that could 
cause serious personal injury.

ASSEMBLY

UNPACKING

This product has been shipped completely assembled.

  Carefully remove the product and any accessories from 

the box. Make sure that all items listed in the packing list 
are included.

 WARNING:

Do not use this product if it is not completely 

assembled or if any parts appear to be missing 

or damaged. Use of a product that is not properly 

and completely assembled could result in serious 

personal injury.

  Inspect the product carefully to make sure no breakage 

or damage occurred during shipping.

  Do not discard the packing material until you have careful 

ly inspected and satisfactorily operated the product.

  If any parts are damaged or missing, please call  

1-866-539-1710 for assistance.

PACKING LIST

Drill-driver
Bit
Bag
Operator’s Manual

WARNING:

If any parts are damaged or missing do not operate 
this product until the parts are replaced. 

Use of 

this product with damaged or missing parts could 
result in serious personal injury.

WARNING:

Do not attempt to modify this product or create 
accessories not recommended for use with this 
product. Any such alteration or modification is 
misuse and could result in a hazardous condition 
leading to possible serious personal injury.

WARNING:

To prevent accidental starting that could cause 
serious personal injury, always remove the battery 
pack from the product when assembling parts.

Summary of Contents for R860071B

































Reviews: