background image

7

WARRANTY

Proof  of  purchase  must  be  presented  when  requesting 
warranty service. 
Limited to RIDGID

®

 hand held and stationary power tools 

purchased //04 and after. This product is manufactured 
by One World Technologies, Inc. The trademark is licensed 
from RIDGID, Inc. All warranty communications should be 
directed to One World Technologies, Inc., attn: RIDGID Hand 
Held  and  Stationary  Power  Tool  Technical  Service  at  (toll 
free) -866-539-70. 

90-DAY SATISFACTION GUARANTEE POLICY 

During the first 90 days after the date of purchase, if you are 
dissatisfied with the performance of this RIDGID

®

 Hand Held 

and Stationary Power Tool for any reason you may return 
the tool to the dealer from which it was purchased for a full 
refund or exchange. To receive a replacement tool you must 
present proof of purchase and return all original equipment 
packaged with the original product. The replacement tool 
will be covered by the limited warranty for the balance of 
the 3 YEAR service warranty period. 

WHAT IS COVERED UNDER THE 3 YEAR 
LIMITED SERVICE WARRANTY 

This warranty on RIDGID

®

 Hand Held and Stationary Power 

Tools covers all defects in workmanship or materials and 
normal  wear  items  such  as  brushes,  chucks,  motors, 
switches, cords, gears and even cordless batteries in this 
RIDGID

® 

tool for three years following the purchase date of 

the tool. Warranties for other RIDGID

®

 products may vary. 

HOW TO OBTAIN SERVICE

To obtain service for this RIDGID

®

 tool you must return it; 

freight prepaid, or take it in to an authorized service center 
for  RIDGID

®

  branded  hand  held  and  stationary  power 

tools. You may obtain the location of the authorized service 
center nearest you by calling (toll free) -866-539-70 or 
by logging on to the RIDGID

®

 website at www.ridgid.com. 

When  requesting  warranty  service,  you  must  present  the 
original dated sales receipt. The authorized service center will 
repair any faulty workmanship, and either repair or replace 
any part covered under the warranty, at our option, at no 
charge to you.

One World Technologies, Inc.

P.O. Box 35, Hwy. 8

Pickens, SC 967

RIDGID

®

 HAND HELD AND STATIONARY POWER TOOL

3 YEAR LIMITED SERVICE WARRANTY 

WHAT IS NOT COVERED

This warranty applies only to the original purchaser at retail 
and  may  not  be  transferred.  This  warranty  only  covers 
defects  arising  under  normal  usage  and  does  not  cover 
any  malfunction,  failure  or  defect  resulting  from  misuse, 
abuse,  neglect,  alteration,  modification  or  repair  by  other 
than an authorized service center for RIDGID

®

 branded hand 

held and stationary power tools. Consumable accessories 
provided with the tool such as, but not limited to, blades, 
bits and sand paper are not covered. 
RIDGID, INC. AND ONE WORLD TECHNOLOGIES, INC. 
MAKE  NO  WARRANTIES,  REPRESENTATIONS  OR 
PROMISES AS TO THE QUALITY OR PERFORMANCE OF 
ITS POWER TOOLS OTHER THAN THOSE SPECIFICALLY 
STATED IN THIS WARRANTY. 

ADDITIONAL LIMITATIONS

To  the  extent  permitted  by  applicable  law,  all  implied 
warranties, including warranties of MERCHANTABILITY or 
FITNESS FOR A PARTICULAR PURPOSE, are disclaimed. Any 
implied warranties, including warranties of merchantability or 
fitness for a particular purpose, that cannot be disclaimed 
under  state  law  are  limited  to  three  years  from  the  date 
of  purchase.  One  World  Technologies,  Inc.  and  RIDGID, 
Inc.  are  not  responsible  for  direct,  indirect,  incidental  or 
consequential damages. Some states do not allow limitations 
on how long an implied warranty lasts and/or do not allow 
the  exclusion  or  limitation  of  incidental  or  consequential 
damages, so the above limitations may not apply to you. 
This warranty gives you specific legal rights, and you may 
also have other rights which vary from state to state. 

Summary of Contents for R840011



















Reviews: