RIDGID micro IR-200, Manual

Page: 10 / 506

4
999-995-066.09_REV. E
micro IR-200 Non-Contact Infrared Thermometer
instructions to operate the equipment. Equipment can be
dangerous in the hands of untrained users.
•
Maintain equipment. Check for misalignment or binding of
moving parts, missing parts, breakage of parts and any other
condition that may affect the equipment’s operation. If
damaged, have the equipment repaired before use. Many
accidents are caused by poorly maintained equipment.
•
Use the equipment and accessories in accordance with
these instructions, taking into account the working
conditions and the work to be performed.
Use of the
equipment for operations different from those intended could
result in a hazardous situation.
•
Use only accessories that are recommended by the
manufacturer for your equipment.
Accessories that may be
suitable for one piece of equipment may become hazardous
when used with other equipment.
•
Keep handles dry and clean; free from oil and
grease.
Allows for better control of the equipment.
Service
•
Have your equipment serviced by a qualified repair person
using on ly identical replacement parts. This will ensure that
the safety of the tool is maintained.
Specific Safety Information
This section contains important safety information that is specific to
this tool.
Read these precautions carefully before using the RIDGID
®
micro IR-200
Non-Contact Infrared Thermometer to reduce the risk of eye injury or
other serious personal injury.
SAVE THESE INSTRUCTIONS!
Keep this manual with the tool for use by the operator.
Infrared Thermometer Safety
•
Do not look into the laser beam. Looking into the laser beam
may be hazardous to the eyes. Do not look at the laser beam
with optical aids (such as binoculars or telescopes).
•
Do not direct the laser beam towards other people. Make
sure the laser is aimed above or below eye level. Laser beams
may be hazardous to the eyes.
•
Do not use this device for personal inspection or medical
use in any way.
This is not a medical device. This could cause
personal injury.
•
Take appropriate precautions when working near
electrical, moving or hot parts.
Close contact may cause
electrical shock, entanglement, burns and other serious injury.
Protective equipment may be required.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
If you have any question concerning this RIDGID
®
product:
• Contact your local RIDGID distributor.
WARNING