4
Unpacking and Checking Contents
Unpacking
NOTE: Before beginning assembly, check
that all parts are included. If you are miss-
ing any part, do not assemble this acces-
sory. Call 1-800-4-RIDGID or E-mail us at
[email protected] to get the
missing part. Sometimes small parts can
get lost in packaging material. Do not
throw away any packaging until the acces-
sory is completely assembled and
attached to your power tool. Check pack-
aging for missing parts before contacting
RIDGID.
List of Loose Parts
Item
Part Name
Qty.
A Stand Assembly ...............................1
B Lower Foot .......................................1
C Bag of Loose Parts ..........................1
D Owners Manual ................................1
NOTE: Only ONE spring pin is required at
the carry handle end of the stand. This
spring pin locks the legs in the set-up or
knock-down position. Instructions to
change the location of this spring pin are
described later in the “Assembly” section
of this manual.
C
D
A
Carry
Handle
B
Assembly
Assembling the Lower Foot
1. From carton and bag of loose parts
remove the following:
2
Hex Bolt, M6 x 41mm
4
Curved Washers M6
2
Hex Nuts M6
2 Assembly
Wrenches
1
Lower Foot
1
Stand Assembly
*Some additional tools may be required to
attach your power tool to the stand. See
“Mounting Power Tools” section of this
manual.
M6 x 41mm
Hex Bolt
M6 Curved
Washer
Lower
Foot
Stand Assembly
Tools Needed for Assembly *
Assembly Wrench
(2 Supplied)
M6
Lock Nut
