![background image](http://html.mh-extra.com/html/ridgid-kollmann/k-375r/k-375r_operators-manual_1459122006.webp)
Kollmann
K-375R
1
/
2
″
Cage Machine
Ridge Tool Company
4
• T-202 Bulb Auger (Figure 2)
• T-211 Spade Cutter (Figure 3)
• T-205 “C” Cutter (Figure 4)
• Safety & Instruction Card
• Rental Checklist Card
• Instruction Video
Figure 1 – Machine with Gloves, Cable and Coupling Pin
Key
Figure 2 – T-202 Bulb Auger: Used for exploring and
breaking up stoppages or returning samples
to surface to determine correct tool.
Figure 3 – T-211 Spade Cutter: Used to get soft grease
or debris moving in the drain.
10. Wear safety glasses and rubber soled, non-slip
shoes. Use of this safety equipment may prevent
serious injury.
11. Only use the K-375R to clean drain lines 2
″
to 4
″
in
diameter. Follow instructions on the use of the
machine. Other uses or modifying the drain cleaner
for other applications may increase the risk of injury.
Description, Specifications and
Standard Equipment
Description
The RIDGID/Kollmann K-375R Drain Cleaning Machine
will clean drain lines 2
″
to 4
″
in diameter and 50 feet in
length. It is specifically designed for the rental market
with a steel wire drum to allow for inspection and cleaning
of the cable.
The steel wire drum is belt-driven by a
1
/
3
HP electric
motor that has a grounded electrical system. An inte-
gral Ground Fault Interrupter (GFCI) is built into the line
cord and a pneumatic foot actuator provides On/Off con-
trol of the motor.
The drum powers a
1
/
2
″
integral wound solid core cable that
has a quick change coupling system for connecting or dis-
connecting tools. The cable is manually fed in and out of the
drain. An integral torque limiter will cause the drum to stop
rotating when excessive torque is created as the cutting tool
attached to the cable hits a snag and stops rotating.
Specifications
Line Capacity ................Recommended for indoor drain
lines: 2
″
- 4
″
lines through 50
′
Drum Capacity .............50
′
of
1
/
2
″
cable
Motor Type...................115V/60 Hz, Reversible,
Split Phase
Rating ..........................
1
/
3
HP @ 1725 RPM
Amps............................6.7
Weight
(Machine & Cable) .......73 lbs.
Length..........................22
″
Width............................13
″
Standard Equipment
K-375R
• K-375R Drum Machine (Figure 1)
• C-44 IW Cable w/solid core (
1
/
2
″
x 50
′
)
• 1 Pair Gloves
• A-13 Coupling Pin Key