4
Flysheet:
1.
Zip the flysheet to the corresponding zip on the rear of the Escape XF1, assemble the
elasticated curved flysheet support bar and attach it to the inside of the flysheet using the
velcro tabs sewn into the flysheet material.
2.
Screw the supplied storm poles onto each end of the curved flysheet bar, locate the upright
storm poles in the velcro retaining flaps of the Escape XF1 and attach the flysheet hooks to
the retaining rings on the upright storm poles.
3.
Adjust the height of the storm poles and peg the flysheet to the ground at the rear of the Escape
XF1, ensuring a generous gap between flysheet and bivvy for optimum protection.
4.
Removal is a reverse of fitting.
