background image

RIDGE

ACCESSORIES

PAGE 6

RADIO CONTROLS, CONNECTORS & DISPLAY

RADIO LAYOUT

LCD DISPLAY

INSTALLING THE BATTERY & BELT CLIP

CHANNEL DISPLAY

BATTERY LEVEL DISPLAY

RECEIVING ICON

TRANSMITTING ICON

DUPLEX / REPEATER ICON

CTCSS / DCS CHANNEL DISPLAY

SCAN ICON

DSC ICON

DSC ICON

DCM ICON

VOX ICON

KEYPAD LOCKED ICON

BUTTON BEEP ICON

LCD DISPLAY

HEADSET OUTPUT

PTT BUTTON

LED INDICATOR

MONI BUTTON

DOWN ARROW

MENU/PWR BUTTON

UP ARROW

CALL BUTTON

MIC

SPEAKER

ANTENNA

BELT CLIP

BATTERY COVER

Belt clip:

The supplied belt clip simply slides into the back of the main radio and clicks in place to lock.

Battery pack:

If fitted, remove the belt clip by lifting the top tab away from the main unit and slide the belt clip up.

Slide the battery cover down approximately 5mm, then lift away the cover.

Insert the battery making sure the batteries label is facing outwards with “up” at the top of the battery.

Be sure to leave the batteries removal ribbon facing outwards.

Replace the battery cover ensuring the battery removal ribbon is laying flat against the battery.

If desired, replace the Belt clip.

Summary of Contents for RR10PK





















Reviews: