background image

1

Installation Guide 

& Operation Manual

Component Installation

 Mounting 

compressor 

........................................................

2

 Mounting 

tank 

.......................................................................

2

 

Mounting air valves .............................................................

2

 

Routing air lines & fittings .................................................

3

 

Mounting pressure sensors ...............................................

3

 

Mounting the controls & ECU ...........................................

3

 Wiring 

........................................................................................

3

Control Panel Features ................................................. 4  

 

Level Sensor Installation

 

Installing external ride height sensors ..........................

5

 

Connecting harnesses to ECU ..........................................

5

 

Sensor rod assembly............................................................

6

 Example 

installations 

..........................................................

6

 
AirPod™ Installation

 

Mounting the unit ................................................................

7

 Wiring 

........................................................................................

7

System Control Options & Icons .................................. 8 

Control Panel Users Guide ......................................9-13           

Calibration .................................................................14

Troubleshooting Guide .........................................15-16

Tips and Tricks ............................................................ 17

Error Codes and Text .............................................18-19

Plumbing Diagrams....................................................20

Wiring Diagrams ...........................................back cover

Contents

  Thank you for choosing a Ridetech air suspension control system. We are committed to providing the best experience 

possible throughout the process of getting your car on air. 

  Our commitment doesn’t end with your purchase, in fact, it has only begun.  This guide should provide you with the 

information you need to properly install and set-up your suspension control system. 

  However, if you find yourself having difficulty or if you have a question that isn’t covered in this book, please call our tech 

department.

 

  Tech Line: 812-481-4969 

 

 

         Website: www.ridetech.com

  In addition to phone support, our website also provides a wealth of helpful product, install, and set-up information. 

Summary of Contents for RidePROe5






















Reviews: