manualshive.com logo in svg

Ridetech RidePRO-HP, Installation Manual & Operation Manual, Page: 1 / 24

Share
Download
Ridetech RidePRO-HP Installation Manual & Operation Manual Download Page 1

1

Installation Guide

& Operation Manual

Component Installation

 

Mounting compressor ........................................................

2

 

Mounting tank .......................................................................

2

 

Mounting air valves .............................................................

2

 

Routing air lines & fi ttings .................................................

3

 

Mounting pressure sensors ...............................................

3

 

Mounting the controls & ECU ...........................................

3

 Wiring ........................................................................................

3

RidePRO-HP Installation

 

Installing external ride height sensors ..........................

4

 

Sensor Rod Assembly ..........................................................

5

 

Example installations ..........................................................

5

AirPod™ Installation

 

Mounting the unit ................................................................

6

 Wiring ........................................................................................

6

System Control Options ...............................................7  

Mobile App 

 

Installing Mobile App & Linking iPhone .......................

8

 

Installing Mobile App & Linking Android.....................

9

Mobile App Users Guide....................................... 10-15           

Calibration .................................................................16

Troubleshooting guide .........................................17-18

Bluetooth Troubleshooting .......................................19

Tips and Tricks ............................................................ 20

Error Codes and Text .............................................21-22

Plumbing Diagrams....................................................23

Wiring Diagrams ...........................................back cover

Contents

  Thank you for choosing a Ridetech air suspension control system. We are committed to providing the best 

experience possible throughout the process of getting your car on air. 

  Our commitment doesn’t end with your purchase, in fact, it has only begun.  This guide should provide you with the 

information you need to properly install and set-up your suspension control system. 

  However, if you fi nd yourself having diffi  culty or if you have a question that isn’t covered in this book, please call our 

tech department.

  Tech Line: 812-481-4969

  In addition to phone support, our web site also provides a wealth of helpful product / install / set-up information. 

Pressure-based

Air Suspension Control

Pressure & Height

Air Suspension Control

REV10 10/16/2020

Summary of Contents for RidePRO-HP

























Reviews:

No comments