simultaneously hold the POWER/RIDER A key on your
6RMI and
hold the D key (if rider A define your
6RMI as rider D)on rider A until the red & blue LED of the two pairing
6RMI
s flash, short press the
POWER/ RIDER A key on one of
6RMI
, 5-9 seconds later the red LED of both 6RMs will extinguish
and the blue LED then will flash briefly every 2-5 seconds, thus they have finished the pairing(now you
could talk with another rider or your pillion).
a) You define another 6RMI as rider A and this rider A also define your 6RMI as rider A
To be sure that your
6RMI
and rider A(another 6RMI) are in status of power off.
Short press(< 1 second) Reset key on your
6RMI
and on Rider A, simultaneously hold the
POWER/RIDER A key on your
6RMI and
hold the POWER/RIDER A key (if rider A define your 6RMI as
rider D)on rider A until the red & blue LED of the two pairing
6RMI
s flash, short press the
POWER/RIDER A key on one of
6RM I
, 5-9 seconds later the red LED of both 6RMs will extinguish
and the blue LED then will flash briefly every 2-5 seconds, thus they have finished the pairing(now you
could talk with another rider or your pillion).
2
）
Pair your 6RMI with rider B or rider C, D , E
Power on your
6RMI
and Rider B
（
the blue LED of both 6RMIs will flash
）
,
simultaneously hold the B
key on your 6RMI (if you define the another 6RMI as rider B) and hold the C key (if rider B define your
6RMI as rider C) on rider B until the red & blue LED of the two pairing BIM’s flash, short press the
POWER/ RIDER A key on one of
6RMI
, 5-9 seconds later the red LED of both 6RMs will extinguish
and the blue LED then will flash briefly every 2-5 seconds, thus they have finished the pairing(now you
could talk with another rider or your pillion). The way of pairing your 6RMI with rider C, rider D, rider
E is same with above procedure.
3
）
）
）
）
Chose which rider you will talk with
After you have paired with all the 6RMIs, then you will can talk with one of riders at a time.
STEP: after finishing the pairing procedure , confirm that all of 6RMIs have been
powered on
.
Initiate an intercom call ( a short press one of intercom key A,B,C,D,E on your
6RMI
), and you can talk
with one of rider A,B,C,D,E
For example:
A short press(< 1 second) the C Key, you will hear a beep ”du-du”, promptly release your hand, then
wait about 5 seconds you could talk with rider C. if then you short press the E key, it will change the
communication to talk with rider E.
4) Pair with your pillion
One of 6RMIs could be your pillion, the way of pairing and initiating an intercom call is same with
above 1),2),3)
Start/finish a interphone talk
Turned on your 6RMI, short press one of the intercom (A, B, C, D, E) key then wait about 5 seconds,
and then you will be able to communicate with another rider or your pillion.
You only need a short press of same one of the intercom (A, B, C, D, E) key, to terminate
communications
Note, to reduce power consumption, when you do not need to talk, don't keep your 6RMI
on intercom state in a long time
If two 6RMIs were out of range, they may will lose connection. when you come whthin range, you only
need to initiate a intercom as normal.
Music function
1) Listen to stereo music from your A2DP enabled cell phone
Read the user manual of your cell phone carefully, if your cell phone is A2DP enabled, the 6RMI can
receive the stereo music from the cell phone.
Please note that only A2DP(stereo bluetooth) enabled cell phone can offer bluetooth music
transmitting service. You can use the Phone/Play key to pause/play the music from A2DP bluetooth
devices
-------------------------------------------------------------------------- 10 ---------------------------------------------------------------------
