the instruction manual that came with the phone so you can enable its Bluetooth function.
Before you can use this 6RMI in combination with your phone , you will need to “pair” it with your cell
phone for the first time. This usually only needs to be performed once with that individual phone
however follow the instructions supplied by the phone manufacturer and save the “pairing” so it will
be automatically connected when this Phone and the 6RMI come into contact again.
1) Enable the Bluetooth function on your cell phone.
Short press(< 1 second) Reset key on the
6RMI.
2) You must place the
6RMI
in “Pairing mode”, this is done by way of a holding down the
Power/Interphone key on the headset, until the red & blue LED flash alternately.
3) Begin the “searching for Bluetooth device” on the cell phone according to the phone’s instructions
4) when the
6RMI
is discovered, the cell phone will display MOTOR PHONE select this and accept the
connection
5) The cell phone will ask you to input a password to enable this connection , when prompted input
password : 0000 (four zeros)
6) Your phone will confirm that pairing has succeeded. Note that the only light showing on the
headset is now the blue one and it will flash once every 5 seconds
Basic 6RMI Operation
Turn on
Short press(< 1 second) Reset key on the BIM.
press the Power/ RIDER A key for 6 seconds or so ,
until the blue lamp illuminate, promptly release the
Power/Interphone key, then the blue led will flash
every 2-5 seconds, and you can see that on the
screen of your cell phone the
6RMI
will ask your
cell phone to connect with it , select ”yes” on your phone
then they will connect each other.(for some phones,
you will have to connect the
6RMI
by the phone)
Turn off press the Power/Interphone key for 6 seconds or so ,
until the blue lamp long illuminate, promptly release the Power/RIDER A key
then the blue led will extinguish.
Increase the volume Short press of the V+ key
Reduce the volume Short press of the V- key
Re-connect the cell phone For some reason(e.g. In some regions of high RF strength), may the
6RMI
will lose connection with the cell phone, a short press on the
Phone/Play key, they will connect each other again.
Safe Cell phone calls function
1) Receive a cell phone call automatically
When income a cell phone call, you will hear the ring on the cell phone and about 3-5 seconds later,
the
6RMI
will receive the call automatically.
--------------------------------------------------------------------------- 8 ---------------------------------------------------------------------
