WALL MOUNTING INSTRUCTIONS
16
Install the radiator ad
at least
60 cm
from the ground.
The object is not
a built-in product.
The shape of the radiator tubes
in the image is indicative.
B
C
F
E
G
A
D
•
Screw the fixings
(B)
to the radiator using the Allen key with 7 mm hexagon.
•
Drill 8mm diameter holes to a minimum depth of 65mm and insert wall plugs
(G)
.
•
Screw the fixings
(E)
on the wall side into the wall plugs
(G)
with the 4.5x65 mm diameter screws
•
Hang the radiator
(A)
on the supports thus assembled, making sure that the fixing pins
(B)
are positioned
on the rear face of the radiator, fit into the appropriate housings of the positioned bushes
(C)
on the wall.
•
Carefully mark the holes in the fasteners
(E)
on the wall side with the tape measure and the spirit level
(minimum height of the radiator from the ground 10 cm).
•
Insert the four corresponding grains
(D)
without tightening them.
•
Secure everything by tightening the eight M6 threaded dowels
(D)
with the help of an allen wrench
with hexagon from 3 mm.
•
Insert the closing bushes
(C)
in the wall fasteners
(E)
by tightening the four corresponding grains
(D)
without tightening them.
(F)
Position of ONE thermostat
