This may take some time. Once the
upload is complete, the Close button is
enabled.
Click the Close button.
You have uploaded the site file to the IPC.
CX Assistant enables you to test
the I/O connections. To do this,
you need to be connected to the
IPC and you must have uploaded
the site file to the Ridder CX500
on the IPC. See the "CX Assistant
Tutorial” guide for more
information.
If the wiring has been connected
correctly, the process computer will start
running immediately and activate the
controls based on the default settings.
5.3
Software settings
The Ridder CX500 can be operated using our Synopta software. Synopta is the user
interface software for operating the FertiMiX Pro C and is installed on the grower’s PC
/ network.
For more information on Synopta, see the "Synopta Software Installation
Guide”.
Depending on the configuration created with CX Assistant, controls will become
available for use in Synopta.
Check the controls and the associated settings in Synopta.
For more information on controls and settings, please see the Synopta help. To access
this help, use the key combination [Ctrl] + [F1].
Have you changed the configuration in CX Assistant? Check the settings of the
relevant controls in Synopta.
5.3.1
Setting up fertigation
Use the following controls in Synopta to set up fertigation:
Valve groups
Valves
Periods
Fertigation recipes
Irrigation
FertiMiX
44
